10
!
PREPARING THE
HANDSET
Contents of the package
Power up the handset
Inserting the rechargeable batteries
The bottom part of the handset contains a battery compartment
for housing two type AAA batteries.
Removing the battery compartment cover
Slide the battery compartment cover downwards and lift it up.
Insert the batteries in the battery compartment.
Make sure the polarity is
correct
. Insert the batteries so that the flat end (negative polarity) of the battery
is pressing against the spring. The handset will not function if the batteries are
incorrectly inserted, and this may result in damage.
Connecting the charger
Insert the AC adaptor plug into the socket on the charging unit. Then connect the AC adaptor to the
power outlet.
• Your handset will not function if the power supply is not correctly connected, or during a
power failure (no emergency mode).
• The telephone cord must pass under the charging cradle to assure its proper standing.
• Position the charging cradle in a clean, dry and well-aired location. The ambient temperature
must be between 5 °C and 40 °C.
Safety note
Use only the following supplied power supply:
- MN-A002-A145 ; 7.5 V, 300mA from MEIC
T-Voice
502 handset
Power
Charging
cradle
Quick
start guide
2xAAA
batteries
Telephone
cord
