22
GARMENT STEAMER
TVV015610MD
TROUBLESHOOTING
Phenomenon
Cause
Troubleshooting
The product does not work after
power-on.
The power plug is not inserted.
Insert the power plug.
The domestic circuit fails or the
fuse is burnt.
Please contact the professionals
for inspection and repair.
The product circuit fails.
Please contact the professionals
for inspection and repair.
The product works but does not
produce any steam after power-
on.
The water tank does not have any
water or too little water.
Fill the water tank.
The internal steam channel is bent
or disengaged.
Please contact the professionals
for inspection and repair.
The heating plate is damaged
Please contact the professionals
for inspection and repair.
The indicator light illuminates, but
does not produce any steam.
Please contact the professionals
for inspection and repair.
The Ironing head drips water.
The steam is condensed, which is
a normal phenomenon.
In use, lift the hot head and
vertically straighten the steam
conduit, andshake the hot head.
The heating plate is damaged.
Please contact the professionals
for inspection and repair.
There is much water scale on the
heating plate.
Shut down, and clean the water
scale in the heating plate.
The product is placed on a high
table, for example, on a table or a
chair.
Place the product on the ground.
Water leak.
Water overflows from the
connection between the water
tank and the main machine.
Remove the steam return pipe
and straighten the bent section.
Remove water scale in the heating
plate.
The steam is blocked
The steam conduit is bent.
After installing the steam conduit,
start, wear gloves, hold the bends
by hand for shaping, and restore
the conduit.
In operation, there is a “grunt”
sound.
When the steam conduit is in the
U-shaped state, the steam
condenses in the steam conduit.
In use, lift the hot head and
vertically straighten the steam
conduit, and shake the hot head.
The product is placed on a high
table, for example, on a table or a
chair.
Place the product on the ground.
