Telstar TCF015930DF, Manual

Page: 13 / 16

13
Coffee Maker
TCF015930DF
AUTOMATICALLY BOOT TIME TO SET AN APPOINTMENT:
1. In standby mode, press two consecutive “prog” key (interval must be within 15 seconds), with the words
“TIMER” (appointments) on the LCD flashing (/ per second), at the same time clock displayed on the
appointment (regulation for the first time shows AM12:00), the clock “:” stop flashing. (if not press any key
within 15 s, cancel the current operation, automatic return to the standby mode)
2. Press the “HOUR” to adjust the HOUR - long press 1 seconds can be quickly adjusted.(according to the
clock in order to adjust: from 12:00 AM until 2 o ‘clock AM 1:00, AM... AM11:00 to PM12:00, PM1:00... PM11:00
to AM12:00... etc.)
3. Press the “MIN” to adjust minute - long press 1 second can be quickly adjusted. (such as: 00, 01, 02, 59,
00, 01...). - According to the “MIN” key can adjust minutes, does not adjust the clock to 59 after transferred
to 00.
4. After time setting,
----Press “prog” key to confirm, enter the reservation status; The blue LED lights up, the LCD screen on the
current “CLOCK time” and “the TIMER CLOCK” booking in between every 5 seconds, according to the
frequency of the alternating until reach the brewing time, blue lights went out , red light flashing, backlight,
machine began to enter the working state;
----Press “ON/OFF” button to cancel the set, return to the standby state;
----If do not confirm the set within 15 s will be automatically cancelled, return to the standby state;
----In the booking status, press “prog” button once, cancellation (blue lights went out ), back to the standby
mode
----In the booking status, press “NO/OFF” key once, will cancel the reservation, return to the standby state;
Under the condition of constant electric machine, tuned appointments is permanent; when the power is on
again, to make an appointment time to return to the initial state (AM12:00); After completes booking, such
as the need to make an appointment, you must restart the reservation function.
Notice:
1. The display system of 12 hours.
2. The accuracy of time: 24 hours no deviation is greater than 4 seconds. 50/60 hz frequency.
3. The standby power consumption to meet the latest eu environmental requirements EUP: power con-
sumption < 1.0 W.