RF Linear Amplifier PCB Assembly Manual
SkyWave DX600 Revision-B
Last Revised - 2/5/2021 9:10 AM
Page 30 of 57
Step #12 - Relay (RLY1)
IMPORTANT - RELAYS ARE POLARIZED AND MUST BE INSTALLED IN THE PROPER
ORIENTATION. MAKE CERTAIN THE RELAY IS FULLY SEATED IN THE PCB BEFORE
SOLDERING.
Insert RLY1 into the PCB at the designated location.
Solder RLY1 into position.
Cut off the excess lead length.
Figure 29
