RF Linear Amplifier PCB Assembly Manual
SkyWave DX600 Revision-B
Last Revised - 2/5/2021 9:10 AM
Page 17 of 57
Step #6 - Fuse Holder (F1)
IMPORTANT - FUSE HOLDERS ARE NOT POLARIZED AND CAN BE INSTALLED IN EITHER
DIRECTION. MAKE CERTAIN THE FUSE HOLDER IS FULLY SEATED IN THE PCB
BEFORE SOLDERING.
Insert F1 (fuse holder) into the PCB at the designated location.
Solder F1 (fuse holder) into position.
Cut off the excess lead length.
Figure 13
