Placing a Call
Pick up the handset to make a call.
Dial the number, and then press the
SEND
soft key or “#”
Answering a Call
Answering an incoming call in the following ways:
If you are on another call, press the
HOLD
key to answer it
If you are not on another call, just lift the handset to answer it
You can also press the
MUTE
button to deny the incoming call
Ending a Call
Hang up the handset
Redial
Dial the
REDIAL
button to dial out the last called number directly
Call Mute and Un-Mute
Press the
MUTE
button during a conversation to mute the call, and press it again to get the microphone return to normal
conversation
Call Hold and Resume
Press
Call Transfer
You can transfer a call in the following ways:
Blind Transfer:
1. Press
or tap the
TRANSFER
soft key during an active call. The call is placed on hold.
2. Enter the number you want to transfer to.
3. Press
or tap the
TRANSFER
soft key
Attended Transfer
1. Press
or tap the
TRANSFER
soft key during an active call. The call is placed on hold.
2. Enter the number you want to transfer to, and then press
3. Press
or tap the
TRANSFER
soft key when the second party answers.
Call Forward
To enable call forward:
1. When then phone is idle, tap
CALL FEATURE
CALL FORWARD.
2. Select the desired forward type:
ALWAYS FORWARD
Incoming calls are all forwarded unconditionally.
BUSY FORWARS
Incoming calls are forwarded when the phone is busy.
NO ANSWER FORWARD
Incoming calls are forwarded when the phone is not answered after a preset time period.
3. Enter the number you want to forward to. For
NO ANSWER FORWARD,
tap the pull-down list of
AFTER RING TIME
, and
then tap the desired ring time to wait before forwarding.
4. Tap the
SAVE
soft key to accept the change.
Call Park
1. Press
#700
during an active call to put a call on Park, or tap your
CALL PARK BUTTON
if one is programmed. The
system will prompt a number (701 etc.) so you know where the call is parked. Once you hear where the call is parked you
can hang up.
2. To pick up a call from Park enter in the number the system prompted (701 etc.), tap
SEND.
Or tap the corresponding
PARK BLF
key.
Call Conference
1. Tap the
CONFERENCE
soft key during an active call. The call is placed on hold.
2. Enter the number of the second party, and then tap the
SEND
soft key
3. Tap the
CONFERENCE
soft key again when the second party answers. All parties are now joined in the conference.
4. Hang up the handset to disconnect all parties.
NOTE:
You can split the conference call into some individual calls by tapping the
SPLIT
soft key.
Volume Adjustment
Press during a call to adjust the receiver volume of the handset/speakerphone/headset.
Press when the phone is idle to adjust the ringer volume.
BASIC CALL FEATURES
+
+
