LTE Outdoor CPE | User Manual
P.
70
Network | Port Management | Port Trigger (Available in NAT, Tunnel
Mode)
Network > Port Management > Port Trigger
The table allows you to configure Port Trigger rules. Port Trigger is a way to automate port
forwarding. Outbound traffic on predetermined ports ('trigger port') causes inbound traffic to
specific ports (call it port
P
here) to be dynamically forwarded to the host which uses trigger
port. Port
P
does not open if port triggering is not activated. Click
“Add +”
button to add a new
rule, clicking
“Delete”
icon ) to delete the rule.
●
Application Name:
Name of the port trigger rule.
●
Triggered Range:
Traffic passing through
t
he port in the triggered range would
automatically open the forwarded port in the forwarded range. The ports in the
triggered range are LAN ones.
●
Forwarded Range:
The ports that would be automatically opened when traffic pass
through ports in the triggered range. The ports in the triggered range are WAN port.