Telrad Connegy Avanti 3025 set, User Manual

Page: 15 / 62

Avanti 3025 set 9
not programmed with DN buttons, disregard
these references.
Some of the features operate slightly differently
on a telephone set that is not programmed
with DN buttons. These differences are pointed
out in a note for each applicable feature. Con-
sult your System Administrator for further details
about the programming of your telephone set.
DN buttons may be programmed in three different modes:
•
ringing mode - the telephone rings and the DN button
flashes green when a call is received.
• flashing mode - the DN button flashes green when a
call is received, but there is no ringing.
• delayed ringing mode - a call rings first at another set
or group of sets, for a programmed length of time,
before beginning to ring at your set.
OUTSIDE LINE BUTTONS
One or more of the buttons on your telephone may be
associated with either specific lines or outside line groups.
To access a line for dialing outside the system, press an out-
side line button.
FLOATING BUTTONS
Calls on outside lines for which no button has been
defined, may be associated with a button just for the dura-
tion of the call. These buttons are called “floating” buttons.
NOTE
Some of the function codes in your system may
be different from those indicated here. If so, see
your System Administrator for the correct codes.
Avanti3025_txt.fm Page 9 Sunday, May 11, 2003 5:28 PM