Avanti 3015ip Installation Notes
4
If Power-over-EtherNet is enabled, follow the instructions in Section
5.3 before inserting the data connector on the rear side jack of the
Avanti 3015ip (see Figure 4).
Figure 4 Avanti 3015ip external connection sockets
If this is the first time the Avanti 3015 ip is connected, perform the ini-
tial setup procedure.
5. I
NITIAL
SETUP
5.1 S
ETUP
CONTROLS
During the setup process you are required to enter data, confirm
your choices, etc. In addition to the softkeys appearing on the
screen, you may use the following buttons:
Keys
Meaning
[LO HI]
Use for navigating along an address line, same as
with the arrow keys on a computer keyboard.
Dialpad buttons
Use for digit input
[#]
Saves the data entered and continues the setup pro-
cess. Same as <Enter> on a computer keyboard.
[
*
]
Dot (“.”)
[0]
,
[1]
For boolean parameters (i.e. parameters whose possi-
ble values are Yes or No), pressing
[0]
changes the
value to No,
[1]
changes to Yes. This can be used
instead of pressing the
{YES}
and
{NO}
softkeys
displayed after pressing
{EDIT}
.
Power
adaptor
To
network
To PC
