Avanti 3015ip Installation Notes
2
1. G
ENERAL
This document describes the procedures necessary for the installa-
tion and initial setup of the Telrad Connegy Avanti 305ip telephone.
2. T
YPOGRAPHIC
CONVENTIONS
Bolded text in brackets indicates a fixed button on the Avanti 3015ip
telephone, as in
[SPEED DIAL/PROGRAM]
.
Bolded italic text in curly brackets indicates a softkey on the tele-
phone, as in
{YES}
.
The Courier font indicates text displayed on the Avanti 3015ip screen,
as in
TVS Menu
.
3. A
VANTI
3015ip
INSTALLATION
ARCHITECTURE
The Avanti 3015ip requires a link to a power source and one to the
data network. If Power-over-Ethernet is not enabled in the organiza-
tion, it is necessary to use a power adaptor.
Optionally, a PC can be connected to the network through the
Avanti 3015ip. Both the telephone and the PC are connected to the
network through a full-line-speed Ethernet switch. This ensures
audio quality and priority regardless of network activity.
Figure 1 Avanti 3015ip basic external connection schematics
The Avanti 3015ip connects directly to an Ethernet network. If con-
nected to an office local area network (LAN), the Avanti 3015ip
requires a category 5 10/100 BaseT UTP cable with an RJ-45 connec-
tor. Figure 1, above, shows the basic external connection architecture
of the Avanti 3015ip.
3.1 C
ONNECTING
THE
A
VANTI
3015
IP
THROUGH
THE
WAN
The Avanti 3015ip can be connected at a remote location through
Public Internet Wide Area Network (WAN). Connection to the WAN
requires a broadband internet link, such as a DSL or cable modem.
