TP-8/16/24/32/64S User Manual Version No.: V1.2
- 34 -
4.SNTP settings coincide with network time protocol, and automatically synchronize
with the device time.
5.
Cascade configuration, it has standalone mode and primary device mode, slave
device mode
.
if cascaded, need to differentiate the primary device and slave device;
need to turn on the primary mode if used as primary device, need to turn
on the slave mode if used as slave device,
The max cascaded device number is three
After cascaded, can manage the device in primary device Web GUI. The
data is saved in primary device, and can used the devices as a whole.
Primary device WAN port connects the upward network, and the last
device LAN port connects downward network.
:
1. It needs to be the same software version between primary and slave
devices.
2. After turn the cascaded mode, the primary LAN port could only connect
slave device, and cannot connect the local area network.
4.2.2 LAN Setting
Open “Network Settings >> LAN Settings” to configure LAN port’s IP address.
