Telpad D7, User Manual

Page: 54 / 77

1. Press Tablet power key and check whether the PLDT Telpad logo appears upon initialization.
2. If the Android™ Tablet doesn’t launch, connect the Tablet to the power supply through the dock.
3. If the problem still exists, please contact the PLDT Business Office.
8.1 Tablet not powering up
1. If there is an electronic device emitting radio frequencies near you, switch it off or put it away from the Tablet.
2. Remove any peripheral equipment such as DSL splitter or fax machine and connect your phone directly to the
modular box.
3. If the problem still exists, please contact the PLDT Business Office.
8.2 No dial tone
1. Check if there is a dial tone. If there is none check your RJ11 connection and make sure it is properly connected.
2. Look at your screen and make sure that the Dialler is set to Line 1; otherwise, touch the Line 1 button. Make sure that
the screen shows the message “Telpad is on the dock”.
3. If the problem still exists, please contact the PLDT Business Office.
8.4 Tablet Dialer cannot make a call
1. Check if the RJ9 cable is properly connected.
2. Unplug and re-plug the coiled cable to eliminate the possibility of a loose RJ9 connector.
3. Try a different telephone unit, if possible, to check if it’s a line problem.
4. If the problem still exists, please contact the PLDT Business Office.
8.5 No audio response in the Handset
47
1. If there is an electronic device emitting radio frequencies near you, switch it off or put it away from the Tablet.
2. Remove any peripheral equipment such as DSL splitter or fax machine and connect your phone directly to the
modular box.
3. If the problem still exists, please contact the PLDT Business Office.
8.3 Distorted audio on speaker