INITIAL SETUP
Power
Plug the supplied IEC power cords into the Infinity Link Gateway and connect each to different mains
power sources. Remember that while redundant supplies do protect against the unit losing power
in the event of a PSU failure, the loss of mains supply voltage is a bigger concern. Accordingly, each
supply should be fed from a different circuit equipped with adequate surge protection and fitted with an
uninterruptable power supply (UPS).
Boot Up and Splash Screen
The front panel of the unit will remain dark during the boot process, after which an Infinity Link splash
screen will appear.
Figure 3: Front panel Splash screen
QUICK-START INSTALLATION GUIDE
