Telos Alliance LINEAR ACOUSTIC ARC, Installation & User Manual

Page: 42 / 72

Chapter 6 |
32
Detailed Setup and Configuration
♦
Pair shuffling can be accomplished by selecting a different SDI input for any given SDI output
♦
To route processed (loudness-controlled) audio to an SDI output pair, choose “Program 1” or “Program 2”
The SDI SRCs be disabled when using an SDI input and output using the
SDI SRC In switches
(D) and
SDI SRC Out switches
(E). Doing so does lower throughput latency slightly, but there is no disadvantage to leaving them enabled. In fact, if there are
any anticipated reference clock changes (either intentional or unplanned) it is safer to leave them enabled.
Note that you can customize the names of the various SDI input pairs to make identifying the sources easier. Click inside the
Label field
(B) of the “SDI In” section, type a name, then click the green checkmark to save your changes.
AES67 Outputs
Figure 6-4 – AES67 I/O menu