Yealink-CP965-220526-UG
Page 4
TelNet Worldwide, Inc. • telnetww.com • (800) 508-1254
Yealink CP965
User Guide
Do Not Disturb
• To enable do not disturb, while on an active call, tap
...
>
DND
. A
DND
icon will appear at top of LCD display
• If not on active call, tap
... More
>
DND
. Tap the home
key to return to the home screen.
• To disable DND, tap the
Exit DND
mode displayed at top
of screen
Call History
• Tap the
History
icon on main screen to view call history
NOTE:
•
A notification of any missed calls is displayed on the
screen. Tap
View
to see any missed calls
Directory
• Tap the
Directory
icon on main screen to view phone
numbers for your organization. Tap the refresh button if
contacts are not displayed. Swipe up / down as needed
to view names / numbers in the directory. Tap the
desired contact to place call. If multiple numbers are
available for the contact, tap the desired number to place
the call.
• Tap
Cancel
or
End Call
to end a call that is actively being
dialed / ringing
• Tap the
Search
magnifying glass and enter desired
name. The directory list will filter all entries that match or
contain that name. Tap the desired contact to place call.
If multiple numbers are available for the contact, tap the
desired number to place the call.
Group Call Park (if enabled)
• While on an active call, tap
...
then
GPark
(you may need
to scroll down to display the
GPark
option). The call will
be parked against an available extension such as 101,
102, etc. The system will automatically announce the park
extension to person that parked the call.
Unpark
• On the
Dsskey
menu, tap
Unpark
, then enter the
extension the call was parked against followed by #
Multicast Paging (if enabled)
• On the
Dsskey
menu, tap
Paging
. Wait for the tone and
begin speaking. The message is broadcast to all phones
connected to LAN with paging enabled. The page is
preceded by a beep tone.
• The conference phone will automatically receive
broadcast pages from other phones on LAN that are
setup with multicast paging.
Meet-Me Conference Bridge (if
enabled)
• On the
Dsskey
menu, tap
Conf Bridge
. This will
automatically dial a pre-defined meet-me conference
bridge number and passcode. Usage charges may apply.
• Contact system administrator for setup.
