* Emergency stop: see chapter 2.1
15
Fig. 4-8
Fig. 4-9
4.5
THREE POINT LINKAGE.
AUTO WRAP 1500 / 1504 /TWIN is intended for rear mounting to the three point linkage, category
2. (Fig. 4-8). With considering of transportation are not the three point brackets mounted on the
machine when it leaves the factory. (See spare parts list chapter 2-1 for more details). When attached
to three point linkage, make sure the machine is level across the tractor. Tight up and lock the lifting
arms so there is no sideways movement.
4.6
TOP LINK.
Adjust the top link of the tractor so that the machine is level with the ground. It is recommended to
use a hydraulic top link, as this makes it easy to adjust the angle of the machine.
During the wrapping process it is recommended to tilt the machine towards the tractor, as this will
prevent the bale from falling off the rollers. (See fig. 4-9).
4.7
FRONT MOUNTING.
As extra equipment the machine can be equipped with quick-couplers for front loader or wheel loader.
(See spare parts list chapter 2-2 for what types of quick couplers there are).
You also need longer hydraulic hoses. (See spare parts list chapter 4-2 for more details).
When front-mounted there must be mounted a large enough counterweight in the three point linkage,
this is to secure the tractors stability.
