WE866Cx Linux Companion RF Test User Guide
1VV0301640 Rev. 1
Page
30
of
34
2020-06-03
5.2.2.
BLE Rx Test
To start the BLE RF Rx test, refer to the QRCT BLE tab below and select the options as
per the test requirement.
1. To start the Rx test, click
Receiver Test
in QRCT.
2. Configure your test instrument for generating BLE waveform as per the test
requirement.
3. Generate N packets and wait till all the packets are transmitted.
4. To get the Number of packets received, click
End Test
in QRCT. Calculate PER
from the transmitted and received packets.
