SL869-3DR Evaluation Kit User Guide
1VV0301266 r0
2016-11-14
Reproduction forbidden without written authorization from Telit Communications S.p.A. - All Rights
Reserved.
Page 9 of 35
Mod. 0810 2011-07 Rev.2
1.3.
Text Conventions
Danger – This information MUST be followed or catastrophic equipment failure or bodily injury
may occur.
Caution or Warning – Alerts the user to important points about integrating the module, if these
points are not followed, the module and end user equipment may fail or malfunction.
Tip or Information – Provides advice and suggestions that may be useful when integrating
the module.
All dates are in ISO 8601 format, i.e. YYYY-MM-DD.
1.4.
Related Documents
•
SL869-3DR Product User Guide
•
SL869-3DR Software User Guide
1.5.
Product Usage Notes
•
To prevent ESD and EOS damage, a properly grounded ESD wrist strap should be worn
when the EVK case is opened
•
Do not alter jumpers while power is applied
•
Do not short the RF signal to ground if antenna supply voltage is connected. Damage to
the EVK or module may occur.
Always follow ESD safety precautions when utilizing the evaluation kit. For additional
information, contact your local sales representative.
This module shall be supplied by a limited power source complying with clause 2.5 of EN 60950-
1 and mounted on a V1 flammability class material or better.
