HE910 Hardware User Guide
1VV0300925 Rev. 32
Page
87
of
111
2019-11-25
Using a GPIO Pad as INPUT
The GPIO pads, when used as inputs, can be connected to a digital output of another
device and report its status, provided this device has interface levels compatible with the
1.8V CMOS levels of the GPIO.
If the digital output of the device to be connected with the GPIO input pad has interface
levels different from the 1.8V CMOS, then it can be buffered with an open collector
transistor with a 47K pull up to 1.8V.
NOTE:
In order to avoid a back powering effect it is recommended to avoid
having any HIGH logic level signal applied to the digital pins of the
HE910 when the module is powered off or during an ON/OFF
transition.
Using a GPIO Pad as OUTPUT
The GPIO pads, when used as outputs, can drive 1.8V CMOS digital devices or
compatible hardware. When set as outputs, the pads have a push-pull output and
therefore the pull-up resistor may be omitted.
Summary of Contents for HE910
Page 1: ... 01 2017 Mod 0805 2017 01 Rev 6 HE910 HW User Guide 1VV0300925 Rev 32 2019 11 25 ...
Page 40: ...HE910 Hardware User Guide 1VV0300925 Rev 32 Page 40 of 111 2019 11 25 ...
Page 71: ...HE910 Hardware User Guide 1VV0300925 Rev 32 Page 71 of 111 2019 11 25 ...
Page 111: ... 01 2017 Mod 0805 2017 01 Rev 6 ...
