GE864-QUAD Automotive V2 Hardware User Guide
1vv0300840 Rev.0.1 24/11/09
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved
page 54 of 65
11.2 ADC Converter
11.2.1 Description
The on board A/D are 11-bit converter. They are able to read a voltage level in the range of 0÷1.9
volts applied on the ADC pin input, store and convert it into 11 bit word.
Min
Max
Units
Input Voltage range
0
1.9
Volt
AD conversion
-
11
bits
Resolution
-
< 1
mV
The GE864-QUAD Automotive V2 module provides 2 Analog to Digital Converters. The input lines
are:
ADC_IN1
available on Ball J11 and Pin 19 of PL102 on EVK2 Board.
ADC_IN2
available on Ball H11 and Pin 20 of PL102 on EVK2 Board.
11.2.2 Using ADC Converter
An AT command is available to use the ADC function.
The command is
AT#ADC=1,2
The read value is expressed in mV
Refer to SW User Guide or AT Commands Reference Guide for the full description of this function.
