Telit Wireless Solutions GainSpan GS2101M User Manual Download Page 14

GS2101M Low Power Wi-Fi Module Hardware User Guide

 

1VV0301395 Rev 3.0  

Page 

14

 of 

53 

2017-11-13

 

Documentation Feedback 

We encourage you to provide feedback, comments, and suggestions so that we can 
improve the documentation. You can send your comments by logging into Telit Support 
Portal. If 
you are using e-mail, be sure to include the following information with your 
comments: 

 

Document name 

 

URL or page number 

 

Hardware release version (if applicable) 

 

Software release version (if applicable) 

 

Contacting Telit Technical Support 

 

For general contact, technical support services, technical questions and to report 
documentation errors contact Telit Technical Support at: 
 

[email protected]

 

 
We recommend adding “Wi-Fi” in subject of the email. For example, the subject of email 
can be “Wi-Fi: Your actual issue or question in brief” like “Wi-Fi: SPI Driver Issue”. 
Also, in description of your email, please provide details about the issue, product and 
module including software firmware version, module version and type, application being 
used,  customizations  done  to  application,  use  case,  issue  frequency,  and  ability  to 
recreate it among other things wherever applicable. 
Alternatively, for more Technical Support information or assistance, perform the following 
steps: 
1. Visit http://www.telit.com, go to 

Products> Wi-Fi and Blue-tooth

, then scroll down to 

the 

Telit Wi- Fi Portal

2. Click 

Access the Portal Here 

icon which will direct you to the GainSpan portal 

http://www.gainspan/secure/login.com 
1. Log in with your customer 

Email 

and 

Password

2. Select the 

Location

3. Select 

Q&A 

tab. 

4. Select 

Ask a New Question

5. Enter your technical support question, product information, and a brief description. 
 
For detailed information about where you can buy the Telit modules or for 
recommendations on accessories and components visit: 
 

http://www.telit.com

 

 
Our aim is to make this guide as helpful as possible. Keep us informed of your comments 
and  suggestions  for  improvements.  Telit  appreciates  feedback  from  the  users  of  our 
information. 

 

 

 

 

 

Summary of Contents for GainSpan GS2101M






















































Reviews: