S50 Hardware User Guide
1VV0301505 Rev. 1
Page
42
of
53
2018-03-02
9.2.5.
FCC RF-exposure Statement
The S50/AI and S50/AP, if used with the antenna described in chapter
7.5 OEM Layout and Antenna Selection in Respect to RED/FCC/IC Certification, do comply
with the FCC/IC RF radiation exposure limits set forth for an uncontrolled environment.
According to table 1B of 47 CFR 1.11310 “Limits for Maximum Permissible Exposure
(MPE), Limits for General Population / Uncontrolled Exposure” the power densitity at 20 cm
distance to the human body is well below the limit of 1mW/cm2.
For the S50/AI the distance to the human body may be 0cm.
The same applies for the S50/AP if the specific antenna
stated in 7.5 OEM Layout and Antenna Selection in Respect to
RED/FCC/IC Certification is used. But if a different antenna is used,
MPE has to be re-evaluated.
9.2.6.
FCC Labeling Requirements for the End Product
Any End Product integrating the S50/AI or S50/AP must be labeled
with at least the following information:
This device contains transmitter with
FCC ID:
RFR-S50
IC:
4957A-S50
Summary of Contents for BlueMod+S50/AI
Page 1: ...BlueMod S50 Hardware User Guide 1VV0301505 Rev 1 2018 03 12...
Page 53: ......
