Telit Wireless Solutions BLUEMOD+S42/AI/ADC/LUA, User Manual

Page: 49 / 85

S42
Hardware User Guide
1VV0301303 Rev. 11
Page 49 of 85 2021-05-06
Not Subject to NDA
5.6. RF Performance
5.6.1. BLE Receiver
VSUP = 1,7V to 3,6V, Tamb = +20°C
Measured conducted according to BT specification RF-PHY.TS/4.0.1
Receiver Frequency
[GHz]
Min Typ Max BT Spec Unit
Sensitivity at 30,8% PER
2,402 -93,0 -70
≤
-70 dBm 2,440 -93,0 -70
2,480 -93,0 -70
Reported PER during PER
report integrity test
2,426 50 50 65,4
50
< PER
< 65,4
%
Maximum received signal at 30,8% PER -10 0
≥
-10 dBm
Continuous power required
to block Bluetooth
reception at
-67dBm with 0,1% BER
0,030 – 2,000 -30 -30
dBm
2,000 – 2,400 -35 -35
2,500 – 3,000 -35 -35
3,000 – 12,75 -30 -30
C/I co-channel 10 21
≤
21 dB
Adjacent channel
Selectivity C/I
F = F0 + 1 MHz 1 15
≤
15 dB
F = F0 - 1 MHz 1 15
≤
15 dB
F = F0 + 2 MHz -25 -17
≤
-17 dB
F = F0 - 2 MHz -25 -15
≤
-15 dB
F = F0 + 3 MHz -51 -27
≤
-27 dB
F = F0 - 5 MHz -51 -27
≤
-27 dB
F = Fimage -30 -9
≤
-9 dB
Maximum level of intermodulation
interferers
-50 -36
≥
-50 dBm
VSUP = 1,7V to 3,6V, T
amb
= -40°C
Measured conducted according to BT specification RF-PHY.TS/4.0.1
Receiver Frequency
[GHz]
Min Typ Max BT Spec Unit
Sensitivity at 30,8% PER
2,402 -93,0 -70
≤
- 70 dBm 2,440 -93,0 -70
2,480 -93,0 -70
VSUP = 1,7V to 3,6V, T
amb
= +85°C
Measured conducted according to BT specification RF-PHY.TS/4.0.1
Receiver Frequency
[GHz]
Min Typ Max BT Spec Unit
Sensitivity at 30,8% PER
2,402 -93,0 -70
≤
. 70 dBm 2,440 -93,0 -70
2,480 -93,0 -70
Table 23: RF Performance BLE Receiver