TELink TLSR8278DK48D User Manual Download Page 6

Page: 6 / 7

Telink Debug EVK TLSR8278DK48D User Manual

2.2

Download firmware

To download firmware into TLSR8278DK48D, first make sure the

TLSR8278DK48D is supplied with power normally. That is, connect the power to the

3V3 of J18, and connect the GND to the GND of J18.

Then connect J18 (SWS) of the TLSR8278DK48D with SWM of a burning EVK.

Meanwhile, connect the miniUSB interface of the burning EVK with PC USB.

Figure 2 Connection chart to download firmware

3V3

SWS

GND

Summary of Contents for TLSR8278DK48D

Page 1: ...Telink Debug EVK TLSR8278DK48D User Manual TELINK SEMICONDUCTOR Keyword Features Pin connection User manual Brief This is a user manual for Telink 8278 Dongle ...

Page 3: ...ug EVK TLSR8278DK48D User Manual 2 Table of contents 1 Product Introduction 3 1 1 General description 3 1 2 Key features 3 2 Pin Connection Guide 3 2 1 Supply power 3 2 2 Download firmware 5 2 3 Test RF signal 6 ...

Page 5: ...Telink Debug EVK TLSR8278DK48D User Manual 4 connect the GND to the GND of J18 Figure 1 Connection chart to supply power 3V3 GND ...

Page 6: ...e TLSR8278DK48D is supplied with power normally That is connect the power to the 3V3 of J18 and connect the GND to the GND of J18 Then connect J18 SWS of the TLSR8278DK48D with SWM of a burning EVK Meanwhile connect the miniUSB interface of the burning EVK with PC USB Figure 2 Connection chart to download firmware 3V3 SWS GND ...