TELIKOU
TM-200 Eight Channel Main Station
2
dynamic and electret condenser microphone. Unbalanced input
The wiring of XLR-3M is as follow:
A) Pin 1 -- Microphone common
Pin 2 -- Microphone hot
Pin 3
– Null
B)
ø6.35mm Plug
T
S
S --- Microphone Common
T --- Microphone Hot
2. Headset connector
4-pin XLR Male or 5-pin XLR Female
Earphone: Dynamic 50-2000 ohm
Microphone: Dynamic 100-600 ohm
The wiring of headset is as follow:
Pin 1
—Mic. common
Pin 2
—Mic. hot
Pin 3--headphone common
Pin 4--headphone hot
Pin 5
—Null
3. Mic Select Switch
Set the Mic select switch to select whether the panel microphone or the headset microphone is
active.
4. Program Feed
Turn the switch up or down will send the external input signal to intercom channel.
ON:
Activated channel always receives external program signal.
OFF: External program signal cannot be sent into system.
INT:
Activated channel receives external program signal. Activated channel receives
external program signal. It will be interrupted when microphone is turned on.
