TELIKOU
MS-800 Eight-Channel Main Station
8
Control 14. When Mic Switch 1 is activated, this program input is automatically cut
off.
The pinout of the Program Input connector is as follows:
Pin 1 --- Common (Shield)
Pin 2 --- + Audio
Pin 3 --- - Audio
25. Announce Out
This connector is 3-pin XLR male. Press the Announce button (3) to make stage or
PA system announcements. It directs the audio from the selected headset or panel
microphone to the Ann Out rear panel connector. The output impedance is 600
ohm for balanced output.
The pinout of Announce Out is as follows:
Pin 1 --- Common (Shield)
Pin 2 --- +Audio
Pin 3 --- -Audio
26. Online Connector
It is used for online function among TELIKOU working main stations. If there are
more than one TELIKOU main stations in system and they are connected by
Online Connector, by pressing any RMK button of any main station kills all the
microphones of belt packs in system. All the TELIKOU main stations can be
connected by Intercom Line Connector as well. But under this condition, by
pressing RMK button of any main station will not affect any belt packs which are
not directly connected to this main station.
This connector is a 3-Pin XLR male. The pinout of Online Connector is as follows:
Pin 1 --- Common (Shield)
Pin 2 --- Control Signal
Pin 3 --- Audio Signal
Notice:
1.
This connector only can be connected to
TELIKOU
main station. It is not
allowed to be connected with
Intercom Line Connector
(Intercom Line);
otherwise, the system will not work properly.
