SBC AVL 4G
User Manual - Telic AG
Pg 21
APN, USERNAME and PASSWORD must be adapted according to the SIM card (Provider).
In case there is no Username (or Password), you have to digit: “”.
When you send an SMS, you must wait for an SMS reply by the device (Ack) confirming IP address,
port, and APN credentials (
you can disregard the other parameters
).
Example:
IP Address: 78.137.103.86 (this is in particular the IP address of telic.kentaur.cc)
IP Port: 1561
APN: internet.m2m.de Username: m2m Password: sim
{IMEI} = last 6 or 15 digits of IMEI – 353322088
958773
Final SMS:
00
b1
958773
78.137.103.86,1561,internet.m2m.de,m2m,sim,
Reply by the device:
00
b4
958773
78.137.103.86,1561,internet.wind,,,1,80,60,,,,,0
8
Connection to Kentaur
Kentaur is Telic’s Application Enabling Platform able to interpret messages sent by our telematics
devices, and present them in an user friendly way thanks to its graphical interface.
The device can be managed through Kentaur once it is connected to the platform.
8.1
Connecting the device to Kentaur
Once the device has been set up (please refer to the chapters 4 and 5), the user has to connect the
device to Kentaur, in accordance with the procedure illustrated in the paragraph 7.3.2.
Then the user has to follow the steps illustrated in the paragraph 8.2 (“Dashboard Guide”).
Once the device is sending first data to Kentaur, the Kentaur backend will check if the IMEI is matching
one of the IMEI of the existing devices; in this case it will accept the device and show the data to the
user.
Now the connection is established, and the device is perfectly integrated into the platform.
If the IMEI is wrong (no match), the device will be rejected.
