SBC AVL 4G
User Manual - Telic AG
Pg 11
OBD II Power Supply
Cable
17023
2-pin OBD-II connector
cable for power supply
only;
Cable length: 1 m
1-wire Temperature
Sensor
90029
1-wire Temperature sensor;
Cable length: 7 m;
Temperature range: -55 °C
to +125 °C;
Accuracy: ± 0,5°C (in range
-10 °C to +85 °C)
Cable for RS232 Tracing
16207
User this cable to charge or
to configure the device via
the Telic Config-Tool
Table 4: List of accessories
4
Operating Set up
The operation set-up of the tracking device can be realized in few quick steps.
Please take proper ESD protection measures (e.g. electrical connection of the
body to ground) to make sure you don’t destroy internal electronics! Repair of
ESD damages caused by user’s negligence will not be covered by Telic’s
warranty. Electrostatic discharge (ESD) is the sudden and momentary electric
current that flows between two objects at different electrical potentials normally
caused by static electricity.
4.1
Operating the device
Please open the SBC AVL 4G housing by pushing the button shown here:
