NT910G
User Manual - Telic AG
Pg 9
B19(800) / B20(800) / B26(850) /
B28(700)
Hardware Features
IP Protection
IP40
SIM Card Holder
1x (1,8/3 Volt)
Size: 25 x 15 mm
Mini-SIM, Form Factor: 2FF
SIM Chip Option: Yes
LEDs
1x Mobile communications 2x
Configurable
Type Approvals
CE
Connectors
D-Sub (9-pin)
1x Female (RS232)
USB
1x Mini-USB (USB 2.0)
RJ11
1x Power + IOs (1x Analogue Input; 1x
Output
RS232
1x (Sub-D9 Female)
USB 2.0
1x (Mini-USB) (USB 2.0)
Software
AT Command Set
3GPP TS 27.005, 27.007 and
Telit custom AT
Programming
Language
C (Telit AppZone IDE)
SIM Application
Toolkit
SAT Release 99
TCP/IP Stack
TCP, UDP, SSL
Pv4/IPv6 stack with TCP and UDP
protocol
SW Update
Serial / USB / FOTA
Power Management
Voltage Range
5V - 32V direct current
Hardware Characteristics
Operating
Temperature
-30°C to +75°C
Dimensions
77 x 66 x 26 mm
Weight
91g
Table 3: Feature Overview
2.5
Telic Certified Accessories
NOTICE
The pentaband antennas listed in this section are suitable both for use with GSM and LTE
networks. Please check, though, which frequency bands your mobile network service provider
supports specifically for LTE Cat-1. Eventually, you might need to purchase a dedicated antenna
to cover the 2600 MHZ band. Please contact us if you require specific recommendations on
suitable antennas to use.
