7. CONNECTOR CONNECTION
Connector used:
DC/SYNC connector --- HR10A-12R-12PB Manufactured by HIROSE DENKI
Compatible connector:
DC/SYNC connector --- HR10A-12P-12S Manufactured by HIROSE DENKI
Picture: DC IN/SYNC connector
(Rear-view)
IMPORTANT
If you plan to use video output from DC IN / SYNC connector (12 pin connector), do
NOT use BNC connector outputs (2 places). If both are used at the same time, you will
not obtain correct video signal due to double termination.
8. SPECIFICATIONS
19
Model
CS3720
Image sensor
All Pixel’s Data Read-out Interline CCD
Optical size
1/2 Type (= Equivalent to 1/2” image pickup tube)
Active pixel
659(H) x 494(V)
Unit cell size
9.9(H) x 9.9(V) micro m (Square-grid array)
Scanning area
6.4(H) x 4.8 mm
Scanning lines
525 lines
Interlace
1/120s 2:1 Interlace mode
1/60s Non -interlace mode
Sync system
Internal/External automatic switch-over
Scanning frequency
31.468kHz(H)
119.88Hz(V) (1/120s 2:1 Interlace mode) or
59.94Hz(V) (1/60s Non-interlace mode)
Aspect ratio
4:3
1 GND
2 +12V
3 VIDEO.GND
4
VIDEO 1 OUT
5 HD/VD.GND
6 HD.IN
7 VD.IN
8 GND
9
VIDEO 2 OUT
10 WEN
OUT
11 TRIG
IN
12
PARTIAL IN
