Telguard TG-7FP Installation & Operating Guide
20
56052401 Rev A
Appendix 2 Troubleshooting Guide
This section provides a summary of all LED indications and their meanings, as well as the expected
behavior of the TG-7FP under various exception conditions.
LED Indicator Guide Normal Operating Mode
LED Symbol
Color
Showing
Indication
LED 1 Activation
Green
Solid On
Unit is activated at the TCC and enabled
Off
Unit not activated at TCC (and disabled)
Flash*
Unit is disabled
LED 2 STC
(System Trouble
Condition)
Red
Off
ALL OK
1 Flash*
System Trouble Condition LPF Low Power Failure
2 Flashes*
NOT APPLICABLE
3 Flashes*
NOT APPLICABLE
4 Flashes*
System Trouble Condition NSC No Service
5 Flashes*
System Trouble Condition RFC Radio Failure
6 Flashes*
System Trouble Condition DTF Dial Tone Failure
7 Flashes*
System Trouble Condition PPF Panel Presence Fail
LED 3
Yellow
Off
Alarm panel idle (Telguard on-hook)
Flash* (1 sec)
Alarm panel off-hook to transmit signals over cellular
LED 4
Acknowledgement
Red
Solid On
TG-7FP waiting for acknowledgement from the TCC
Off
Idle state
Flash*
When flashing with LED 1, unit has failed activation.
CALL TELGUARD TECHNICAL SUPPORT
LED 5 Radio
Green
Off
TG-7FP initialized
On
TG-7FP initializing with cellular network
Flash (1 sec)
Radio receiving message
Flash (2 sec)
Radio sending message
Flash (2x/6
sec)
Link Supervision Mode
LED 6
Not used
LED 7 Trip Input
Green
Solid On
Trip Input activated
Off
Trip Input not activated or is restored
LED 8 Power
Red
Solid On
DC power connected to unit
*
LED will continuously flash each pattern
