Kenwood Radio Series
F.01U.321.735
17
7.4.1 Per Line Function Tone Configuration
The
Function Tone
page is used to enable function tones and configure what
System/Zone and Channel information should be serially sent to the radio.
To
configure the Per Line Function Tone
, do the following:
1. From TSM, click the
Function Tone
tab
.
The Function Tone page appears.
2. Select the
Enable
check box
for all channels to be accessed by the IP-224.
NOTE:
Each page supports
10 channels
. There are 100 pages to support 1000
channels.
3. Program the
System and Channel information
.
This information should correspond with the radio programming.
NOTE:
The example shown indicates function tones 1 through 4 are mapped to
system 1 channels 1–4, function tones 5 through 8 are mapped to system 2
channels 1–4 and function tones 9–10 to system 3 channels 1–2, respectively.
