TT-44 Transmitter
UNPACKING:
Unpack your wireless IFB
system. If there are any damages or shortages,
refer to the “Warranty Service Information.”
TT-44 TRANSMITTER LOCATION:
Se-
lect a suitable location for the TT-44 Trans-
mitter. Try to keep a clear, unobstructed path
between the transmitter and receiver and al-
low plenty of free space around the Transmit-
ter antenna.
POWER CONNECTION:
Plug the supplied
AC power adaptor into a standard 120 vac
(U.S.A.) electrical outlet. Plug the other end
of the cord into the power input jack on the
rear panel of the TT-44
DO NOT TURN
UNIT ON AT THIS TIME.
Figure 5
Connecting Power
ANTENNA CONNECTIONS:
Connect the
telescoping whip antenna to the rear panel
ANTENNA jack.
For best results, the antenna should be verti-
cally aligned. Tighten the coaxial connector to
hold the antenna in place, and extend the an-
tenna to full length.
Figure 6
Antenna Connection
-8-
CAUTION
Avoid heat sources when selecting a loca-
tion for the Transmitter. The heat given off
by radiators or direct sunlight may eventu-
ally damage the unit.
