SETTING SYSTEM GAIN
If you have followed the instructions up to
this point you should now be ready to turn
both the transmitter and the receiver “ON”
and set optimum signal gain.
Place the power switch on the TT-44 Trans-
mitter to the “ON” position. The red LED in
the power switch should now be lit. Turn your
microphone or other input equipment on and
the AUDIO LEVEL Meter will now respond
to your equipment.
Normal Level Setting:
The balanced or un-
balanced “Audio Gain” (Input Level Control)
will adjust the audio of the transmitter and for
normal readings this is in the green area be-
tween -10 and O. Readings in this area of the
meter give the highest dynamic range and no
overload.
Figure 10
Ideal Audio Level Meter Reading
High Level Setting:
If your input equipment
has a high output, you will have to adjust the
Input Switch or Input Level Control to the
green area of the AUDIO LEVEL Meter or
you will overload the TT-44 indicated by one
or more red LED’s resulting in distortion.
Figure 11
High Level Setting
-11-
