13
Refer to the “To Stop a Running Job” section to stop simulation.
To Execute a System Check (Initialization)
In ready mode, press
high
button while h olding
safe
button, the device will start an
initialization process as it does when you turn on the device. After it’s complete ,
the device enters ready mode.
To Park the Arm (For transportation)
In ready mode, press
normal
button while holding
safe
button, the device will park
the pick-n-place arm for transportation. After the arm parks, the device will enter
ready mode. You may turn off the device for transportation.
To release the device from this park condition, turn on the power.
Maintenance
Periodically cleaning the device is a good habit. Follow the steps below to do it.
1) Turn off the AC power switch.
2) Remove the master and blank discs.
3) Unplug the power cord from the wall outlet.
4) Use a clean lint-free cloth moistened with warm water.
5) Dry the unit immediately with a clean lint free cloth.
