Intercom Channel Connections
Channel Capacity: When connecting intercom stations to the PS2000L, determine
the total current for all stations on each channel. The total per channel should not ex-
ceed 2A. If you exceed this limit, the PS2000L will provide an overload indication.
Note that if you are using DC wallpacks with any intercom stations, you do not need
to add the current consumption of those stations to the total current.
Clear-Com Applications: Refer to your Clear-Com system documentation for cable
wiring and connection details. After connecting the components, perform the power-
up check on page
Audiocom Connections: Cable wiring details are shown in Figure
. Some typical
applications are shown in Figures
and
. After connecting the components, perform
the power-up check on page
7
Figure 2. Audiocom / Clear-Com Selector Switch (Top Cover Removed)
