4
1.
Combine/Isolate Switch: When in the Combine position, the unit will combine the audio signals of the two channels
to create a single audio channel where all users can intercommunicate. When in the Isolate position, the unit will cre-
ate two groups of completely independent users.
2.
Channel Status Indicators: The indicators are green for normal operation and red when there is an overload or short
circuit. The circuitry in the unit will automatically reset when the overload or short circuit is located and fixed.
3.
Universal AC Power Input: The unit accepts any input power in the range of 100-240 VAC, 50/60 Hz.
4.
Intercom Channel Connectors: When the Combine/Isolate switch is set to the Isolate position, each channel
connector is powered separately and has completely separate intercom audio. When the Combine/Isolate switch is set
to the Combine position, each channel is still powered separately, but the audio signals are combined so that all users
on both channels can intercommunicate.
5.
BAL/UNBAL Selector Switch: This selector switch allows the user to configure the unit for use in either an
Audicom
®
(BALANCED) or Clear-Com (UNBALANCED) system. Compatibility includes channel connector pin-
outs, channel power requirements, and call signaling requirements. The default setting for this switch is in the
Audiocom
®
(BAL) position.
FIGURE 1.
PS-2001L Front and Rear Panel Features
1
2
Combine
UNBAL
Isolate
BAL
PS-2001L
4
3
1
5
2
CH 1
CH 2
CLASS 2 WIRING 1.5A 24VDC
100-240 VAC 60/50 HZ
®
TELEX COMMUNICATIONS, INC. MADE IN USA
Summary of Contents for Audiocom PS-2001L
