background image

II

  

IP-223 

to 

Kenwood 

Radios 

Table of Contents 
1

 

General ................................................................................... 1

 

2

 

Setup ....................................................................................... 1

 

2.1 

TK-x150/180 Model Cable Assembly:........................................................................... 1 

2.2 

TK-x80 Model Cable Assembly: .................................................................................... 1 

2.2.1 

IP223 Rev F or higher Board Configuration: ......................................................... 2 

2.2.2 

IP223 Rev A to Rev E Board Modifications: ......................................................... 2 

2.3 

TK-x90 Model Cable Assembly: .................................................................................... 2 

2.3.1 

IP223 Rev F or higher Board Configuration: ......................................................... 2 

2.3.2 

IP223 Rev A to Rev E Board Modifications: ......................................................... 3 

2.4 IP223 

Configuration: ...................................................................................................... 4 

2.4.1 

Per-line setup screen ............................................................................................... 4 

2.4.2 

IP223 Jumper settings ............................................................................................. 4 

2.5 Radio 

Configuration........................................................................................................ 5 

2.5.1 TK-x80 

Series ......................................................................................................... 5 

2.5.2 TK-x90 

Series ......................................................................................................... 6 

2.5.3 TK-x150/180 

Series ................................................................................................ 8 

 
 

Summary of Contents for 80












Reviews: