IP-223 to Kenwood Radios
9
For the TK-x180, the AUX programming screen is different. Please note that the same interface
cable is used for both the TK-x150 and TK-x180 radios. If COR is used, IP-223 Jumper 8 (Line
1) or Jumper 30 (Line 2) will have to be placed in a neutral position for the Aux port pin 20 on
the TK-x180 to function properly as COR.
TK-x180 auxiliary setup screen
Suggestions or Comments
We’d appreciate your input. Please send us your suggestions or comments concerning this application
note, by fax (402-467-3279) or e-mail them to
:
Technical Support:
Email address: [email protected]
Phone #:
1-800-898-6723
TELEX Communications, Inc
.
Vega Signaling Products
8601 East Cornhusker Highway, Lincoln, Nebraska, 68507
Phone: (800) 752-7560 Fax: (402) 467-3279
E-mail: [email protected], Web: www.vega-signaling.com
