28
Chapter 5.
Security Settings > Packet filters
Packet Filter enables you to control what packets are allowed to pass the router.
Outbound filter applies on all outbound packets. However, inbound filter applies on
packets that are destined to Virtual Servers or DMZ host only. You can select one of
the two filtering policies:
1. Allow all to pass except those match the specified rules
2. Deny all to pass except those match the specified rules
You can specify 8 rules for each direction: inbound or outbound. For each rule, you can define
the following:
•
Source IP address
•
Destination IP address
•
Destination port
•
Use Rule#
For source or destination IP address, you can define a single IP address (4.3.2.1) or
a range of IP addresses (4.3.2.1-4.3.2.254). An empty implies all IP addresses.
Summary of Contents for TW-WLAN
Page 1: ...1 TW WLAN Router User Guide Copyright TeleWell Oy 4 2011...
Page 2: ...2...
Page 56: ...56...
