24
Main Settings > Wireless
•
Wireless Module: Enabled is the default. Selecting this option will allow you to set your
Wireless Access Point (WAP) settings.
•
Network ID (SSID): Service Set Identifier (SSID) is the name designated for a specific
wireless local area network (WLAN). The SSID's factory default setting is 1G-WLAN.
Changing the SSID will enable you to identify your network easier. ( Note: SSID
names may contain up to 32 ASCII characters).
•
Channel: Channel auto is the default. Devices on the network must share the same
channel. (Note: Wireless adapters automatically scan and match the wireless settings.
You may also select the channel you wish to use).
•
Wireless Mode: B/G/N mixed mode is default
•
Security: Wireless network security is enabled by default (default key: 1234567890).
Either WPA-PSK or WPA2-PSK are recommended. They perform better than WEP.
•
WPA-PSK / WPA2-PSK: Choose encryption type, TKIP or AES. With WPA-PSK you
should choose TKIP-encryption, with WPA2-PSK-you should choose AES-encryption.
The password lenght is 6-63 letters or numbers.
Summary of Contents for TW-WLAN
Page 1: ...1 TW WLAN Router User Guide Copyright TeleWell Oy 4 2011...
Page 2: ...2...
Page 56: ...56...
