VDSL2 Manual
8
4.3 Select Advanced Setup
Select the Advanced Setup. The menu below will be used frequently. As an exercise
and an example now the IP address will be set.
Figure 4.3 Advanced Setup
Attention: The settings in the following Chapter 4.4 only need to be performed in
order to change LAN settings. Such a change may be necessary when
connecting the VDTU2-104 & 204 Modem for the to a new control PC
and/or in order to turn the IP address changed via a shell command into a
default address for the next restart of the board.
4.4 Select LAN
The menus below will not be used very often. But when connecting the VDTU2-104
& 204 Modem to a new control PC, you may want to go through the following steps
in order to make the IP address previously set by ifconfig in the terminal console
permanent. Or on some later occasion you may want to change it again without
using the console. Then the menu below will help you too.
In order to set the IP address, click on “LAN Settings”.
Figure 4.4 LAN menu
