Ø
Hostname
: the name of the device that you want to assign IP Address to.
Ø
MAC Address
: the MAC Address of the device that you want to assign IP Address to.
Ø
IP Address
: input the permanent IP Address that you want to assign to the device.
You can determine to enable it or not, and can also add new client and edit or delete existing ones.
IP Filter:
IP filtering is used to control specific IP addresses to access.
Ø
Select “No Filtering" to disable this function.
Ø
Select “Block all in the list" to deny IP addresses that you have set in the IP filtering list to access.
You can select to add new configuration in the list (no more than 10), edit or delete exist ones.
URL Filtering
URL filtering is used to control devices on the LAN access to specific URLs.
Ø
Select “No Filtering" to disable this function.
Ø
Select “Block all in the list" to deny all devices in the LAN to access the URLs that you have set
in the URL filtering list.
You can select to add new configuration in the list (no more than 10), edit or delete exist ones.
Port Forward
Port Forward is used to forward incoming traffic to specific ports or Internet addresses on your
network.
Port Trigger
In computer network, an application makes connection to external computer by use specific
port (trigger port), router forward external connection to internal port as you specified (trigger
port)
Device List:
The Device List lists the information about the device in the LAN including IP address, host name,
MAC address and connect mode.
9.5
Service
Sharing
You can view the status information of SD card, while browsing the local file and create folders. Only
for a transfering of small files.
Upload a single file to the current directory of SD card, because the browser limitations, file name and
share path does not exceed 150 characters. Maximum size of uploaded file is 1.9G.
9.6 System
System set:
Ø
Change Password
: Input the new password; confirm it and click “Save” to finish the settings.
Ø
Change Settings:
You can set the function of 'System work mode', 'Standby timer on Battery'
and 'turn Off Backlight'.
Config:
Reset:
Click "Reset" to reset the configuration to the factory settings.
Backup Settings:
Click "Backup" to back up the configuration file to the local PC.
Restore Settings:
Click "Restore" to restore the settings from the configuration file backed up in the
local PC.
Firmware Update:
Click "Update" to through the local upgrade software version.
