The old PIN is needed if you want to unlock SIM or set a new PIN. Select “Lock” and click “Save”
button when you don’t want to use the PIN.
Note:
The PUK (an 8-digit code) is required when PIN is input incorrectly 3 times. If the PUK is
wrongly input for continuously 10 times, the card will be damaged. Please contact the network service
provider for details.
9.3 WIFI
Basic:
Ø
SSID Switch:
You can choose to 'Enable' or 'Disable'.
Ø
Wireless Interface:
There are different options when you select different Wireless Interface.
802.11b Only: 802.11g Only: 802.11b/g: 802.11b/g/n.
Ø
Regulatory Domain:
Select the domain for the WIFI access point.
Ø
WIFI Channel:
Different domain has different channels.
Ø
Beacon interval:
Beacon interval is the frequency of broadcast packets from the device which is
used to synchronize wireless networks. Set lower value for finding and connecting to the device
fast when higher value helps to save power.
SSID:
Ø
SSID:
This name is visible to other WIFI-enabled devices, and is used to identify your WIFI
network. The length of the SSID must be 1-32 characters long including “_”.
Ø
Broadcast:
You can choose to 'Enable' or 'Disable'.
Ø
Max Number of Users:
Set the maximum number of WIFI users. If your network has problems,
you may want to decrease the number of WIFI users allowed to connect to the device. The
default value is “10”.
Security:
This part helps you configure the security of the wireless network.
Select an encryption mode in the list and set your password. If you select "None", any WIFI-enabled
device can connect with the WLAN without the password.
Ø
None:
Not security. It is not recommended since anyone can access your device and use your
internet connection.
Ø
WEP 64 Bit - Shared
: Lower security. Works with older and newer WIFI devices. Recommended
only if your devices don't support WPA or WPA2. Shared WEP uses the same key for encryption
and authentication which is considered to be less secure than open WEP. 5 ASCII characters or
10-digit HEX number needed.
Ø
WEP 128 Bit - Shared
: Lower security. Works with older and newer WIFI devices.
Recommended only if your devices don't support WPA or WPA2. Shared WEP uses the same
key for encryption and authentication which is considered to be less secure than open WEP. 13
ASCII characters or 26-digit HEX number needed.
Ø
WEP 64 Bit - Open
: Lower security. Works with older and newer WIFI devices. Recommended
only if your devices don't support WPA or WPA2. Open WEP uses the key only for encryption. 5
ASCII characters or 10-digit HEX number needed.
Ø
WEP 128 Bit - Open
: Lower security. Works with older and newer WIFI devices. Recommended
only if your devices don't support WPA or WPA2. Open WEP uses the key only for encryption. 13
ASCII characters or 26-digit HEX number needed.
Ø
WPA - Personal TKIP
: A strong security standard, supported by most WIFI devices. 8 to 63
ASCII characters needed.
Ø
WPA - Personal TKIP/AES
: A strong security standard, supported by most WIFI devices. 8 to 63
ASCII characters needed.
Ø
WPA2 - Personal AES
: A stronger, newer security standard. Limited to newer WIFI devices. 8 to
63 ASCII characters needed.
