TeleWell TW-EA510v3(c) 3G/4G, User Manual

Page: 94 / 101

93
SNMP V3:
Specify a name and password for authentication. And define the access right from identified IP
address. Once the authentication has succeeded, users from this IP address will be able to view
and modify the data.
SNMP Version: SNMPV2c and SNMPv3
SNMPv2c is the combination of the enhanced protocol features of SNMPv2 without the SNMPv2
security. The “c” comes from the fact that SNMPv2c uses the SNMPv1 community string paradigm
for “security”, but is widely accepted as the SNMPv2 standard.
SNMPv3 is a strong authentication mechanism, authorization with fine granularity for remote
monitoring.
Traps supported: Cold Start, Authentication Failure.
The following MIBs are supported:
From RFC 1213 (MIB-II):
þ
System group
þ Interfaces group
þ
Address Translation group
þ IP group
þ
ICMP group
þ
TCP group
þ UDP group
ý
EGP (not applicable)
þ Transmission
þ
SNMP group
From RFC1650 (EtherLike-MIB):
þ dot3Stats
From RFC 1493 (Bridge MIB):
þ
dot1dBase group
þ dot1dTp group
þ
dot1dStp group (if configured as spanning tree)