TeleWell TW-EA510v3(c) 3G/4G, User Manual

Page: 12 / 101

2.4 The Rear Ports
1 Antenna Connect the antenna to this port.
2 ON/OFF Power ON/OFF switch.
3 Power Connect the supplied power adapter to this jack. After the router is powered
on, press this reset button using the
end of paper clip or other small pointed object for 6 seconds and
above to restore it to factory default settings.
4 Reset 1. Recovery procedures for non-working routers (e.g. after a
failed firmware upgrade flash).
2. Recovery procedures for a lost web interface password.
5 WPS Press the WPS button according to the following two to achieve
different functions.
(1) WPS: Press 2-6 seconds until WPS LED flashes green to
trigger WPS function
(2) Wireless ON/OFF Switch: Press over 6 seconds after WPS
LED is off to switch on wireless function. Press over 6 seconds
again for disable wireless function.
6 USB Connect the USB cable to this port.
7 Ethernet Connect a UTP Ethernet cable (Cat-5 or Cat-5e) to one of the
four LAN ports when connecting to a PC or an office/home
network of 10Mbps or 100Mbps.
8 DSL Connect the supplied RJ-11 (“telephone”) cable to this port when
connecting to the ADSL/telephone network.