40
Advanced Settings > Routing
Routing Tables
Allow you to determine which physical interface address to use for outgoing IP
data grams. If you have more than one routers and subnets, you will need to
enable routing table to allow packets to find proper routing path and allow
different subnets to communicate with each other.
Routing Table settings are settings used to setup the functions of static and
dynamic routing.
o
Dynamic Routing
Routing Information Protocol (RIP) will exchange information about
destinations for computing routes throughout the network. Please
select RIPv2 only if you have different subnet in your network.
Otherwise, please select RIPv1 if you need this protocol.
o
Static Routing
For static routing, you can specify up to 8 routing rules. You can
enter the destination IP address, subnet mask, gateway, hop for
each routing rule, and then enable or disable the rule by checking
or un-checking the Enable checkbox.
-> Save
Summary of Contents for TW-3G
Page 1: ...TW 3G Router USB interface Wireless access Point 802 11b g n 300 Mbps User Guide...
Page 2: ...2...
Page 46: ...46...
