29
4.4 Security Settings
Security Settings > Packet filters
Packet Filter enables you to control what packets are allowed to pass
the router. Outbound filter applies on all outbound packets. However,
inbound filter applies on packets that are destined to Virtual Servers or
DMZ host only. You can select one of the two filtering policies:
1.
Allow all to pass except those match the specified rules
2.
Deny all to pass except those match the specified rules
You can specify 8 rules for each direction: inbound or outbound. For each rule,
you can define the following:
•
Source IP address
•
Destination IP address
•
Destination port
•
Use Rule#
For source or destination IP address, you can define a single IP address
(4.3.2.1) or a range of IP addresses (4.3.2.1-4.3.2.254). An empty
implies all IP addresses.
Summary of Contents for TW-3G
Page 1: ...TW 3G Router USB interface Wireless access Point 802 11b g n 300 Mbps User Guide...
Page 2: ...2...
Page 46: ...46...
