background image

                                                                                        

 

2.3.3 

For the United Kingdom 

 

For your safety please read the following text carefully. 

If the fitted molded plug is unsuitable for the socket outlet, then the plug should be cut off and disposed of 
safely.  

 

 

 

 

 

DANGER 

Do not plug the cut-off plug into a socket outlet! There is a danger of severe 
electrical shock! 

 

 

 

If a new plug is to be fitted, please observe the wiring code as shown below. In case of doubt, please consult 
a qualified electrician. 

 

 

 

 

 

WARNING 

This appliance must be earthed (grounded). 

 

 

 

 

 

 

 

 

IMPORTANT 

The wires in this mains lead are colored in accordance with the following codes: 

 

Green-and-Yellow : Ground (Earth) 

 

Blue : Neutral 

 

Brown : Live 

 

 

 

If the colored wires of the mains lead of this appliance do not correspond with the colored markings 
identifying the terminals in your plug, proceed as follows: 

The wire which is colored GREEN-AND-YELLOW must be connected to the terminal in the plug which is 
marked by the letter E or by the Earth symbol or colored GREEN or GREEN-AND-YELLOW. 

The wire which is colored BLUE must be connected to the terminal in the plug which is marked with the letter 
N or colored BLACK. 

The wire which is colored BROWN must be connected to the terminal in the plug which is marked with the 
letter L or colored RED. 

If you have any questions concerning the proper power cord to use, please consult the dealer from whom you 
purchased the product. 

 

 

 

 

 

 

 

 

 

 

 

                                                                                                                                                       

 

   

Summary of Contents for TEL-15MR


























Reviews: