Televes RSD-7255, User Instructions

Page: 18 / 26

User instructions “RSD - 7255”
18
TP Setup
7
In general this option does not need to be used, as the receiver
automatically detects all the programmes contained in the
transponder.
However, some of the programmes transmitted in test mode do not
have the adequate information available.
In these cases, it is possible to manually introduce the PIDs of the
desired programme, so that this programme can be recognised by
the IRD.
Each PID can be entered as decimal value. When the PID search is
finished, the following will be shown.
8
When you select “Delete TP”, then, a dialog box which is confirming
that you want to delete the active transponder or not. Select “Yes” for
deletion, “No” for cancel.
TP
Setup
Check Signal
Start
Set PID
Delete TP
Satellite ASTRA
Univ. LNB YES
LNB Freq. 1 9750
LNB Freq. 2 10600
0/12 Volt None
14/18 Volt None
22KHz None
DiSEqC Port A
Antenna 1
Transponder TP52
Frequency 12168
Symbol Rate 27500
Polarization Ver
FEC AUTO
22KHz ON
Set PID
Video PID 0
Audio PID 0
PCR PID 0
OK Cancel
For reference:
Please check the following points when the signal level message is “Unlock”:
- Adjust the position of antenna until the signal level to be “Lock”
- Change the settings of transponder data up to be “Lock”.